Menu
Your Cart

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires
$25.75
5 + $24.21
10 + $22.66
50 + $21.12
100 + $19.57
  • Model: 23HS30-3004S
  • Stock Status: 1875
  • SKU: 23HS30-3004S

Available Options

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 3A, with holding torque 1.9Nm (269oz.in).


Electrical Specification

  • Manufacturer Part Number: 23HS30-3004S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 1.9Nm(269oz.in)
  • Rated Current/phase: 3A
  • Phase Resistance: 1.12ohms
  • Inductance: 4.8mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 76mm
  • Shaft Diameter: Φ6.35mm
  • Shaft Length: 21mm
  • D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 1.05kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 4.8
Phase Resistance(ohm) 1.12
Rated Current(A) 3
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 189
Holding Torque(oz.in) 267.6
Physical Specification
IP Rating 40
Product Type Hybrid Stepper Motor
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 76
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 6.35
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1100
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS30-3004S_Full_Datasheet.pdf 144.49KB Download
23HS30-3004S.STEP 1.11MB Download
23HS30-3004S_Torque_Curve.pdf 159.74KB Download

Write a review

Note: HTML is not translated!
Bad Good
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with hold..
$25.75
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with hold..
$25.49
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191..
$25.49
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$27.94
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.8..
$20.99
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.