Menu
Your Cart

Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft

Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4Wires Φ6mm Shaft
$25.49
5 + $23.28
10 + $22.17
50 + $21.06
100 + $19.95
  • Model: 23HS30-2804S1
  • Stock Status: 1000
  • SKU: 23HS30-2804S1

Available Options

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in).
Please Notice: This shaft is 6mm diameter.


Electrical Specification

  • Manufacturer Part Number: 23HS30-2804S1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Holding Torque: 1.85Nm(262oz.in)
  • Rated Current/phase: 2.8A
  • Phase Resistance: 1.13ohms
  • Inductance: 4.8mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 76mm
  • Shaft Diameter: Φ6mm
  • Shaft Length: 21mm
  • D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 1.2kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 4.8
Phase Resistance(ohm) 1.13
Rated Current(A) 2.8
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 185
Holding Torque(oz.in) 262
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 76
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 6
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1100
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS30-2804S1_Full_Datasheet.pdf 143.8KB Download
23HS30-2804S1.STEP 1.92MB Download
23HS30-2804S1_Torque_Curve.pdf 177.52KB Download

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.26Nm (178...
$17.99
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 1.0A, with holding torque 1.35Nm (191..
$25.49
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with hold..
$25.75
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191..
$25.49
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$27.94
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.