Stepper Motor Driver &amp; Controller

Modbus RS485 Closed Loop Stepper Motor Driver 0.5-7.0A 24-48VDC

Model: CL57RS

CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers i..

$102.69

Modbus RS485 Closed Loop Stepper Motor Driver 2.1-8.0A 30-110VDC or 18-80VAC

Model: CL86RS

$143.73

Modbus RS485 Stepper Driver 0.1-8.2A 18-80VAC or 30-110VDC for Nema 34 Stepper Motor

Model: DM882RS

DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. ..

$112.95

Modbus RS485 Stepper Driver 0.5-5.6A 24-48VDC for Nema 17, 23, 24 Stepper Motor

Model: DM556RS

$82.15

Stepper Motor Controller 2 Channels 1.0-5.6A 20-40VDC Speed Adjustable

Model: DM456AI

The DM456AI has built with a pulser already, you can control two Max current 2.8A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction seperately. It was widly..

$61.61

Digital Stepper Driver 0.3-2.2A 10-30VDC for Nema 8, 11, 14, 16, 17 Stepper Motor

Digital Stepper Driver 0.3-2.2A 10-30VDC for Nema 8, 11, 14, 16, 17 Stepper Motor

Hot Sale

Model: DM320T

This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 8-Nema 17 size) smoothly with less heat and noise. It works with 10-30VDC voltage and can provide max 2.2A peak current. You can set the DIP switches t..

$13.59

Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor

Model: DM332T

This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10-30VDC voltage and can provide max 3.2A peak current. You can set the DIP switches ..

$15.86

Y Series Digital Stepper Driver 0.3-2.2A DC18V~36V for Nema 14, 17, 23 Stepper Motor

Model: DM420Y

Mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effective in applications where users expect low heat, low noise, low vibration, high stability, and high precisio..

$19.56

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Hot Sale

Model: DM542T

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature ..

$20.39

Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor

Model: DM542Y

$29.34

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

Hot Sale

Model: DM556T

The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20-50VDC and it can output up ..

$22.66