Menu
Your Cart

Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor

Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
US FREE SHIPPING
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
Digital Stepper Drive 1.0-3.2A 18-30VDC for Nema 17, 23 Stepper Motor
$15.86
5 + $15.75
10 + $15.63
50 + $15.52
100 + $15.17
  • Model: DM332T
  • Stock Status: 1000
  • SKU: DM332T

Available Options

This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10-30VDC voltage and can provide max 3.2A peak current. You can set the DIP switches to get the current and microsteps you need.


Key Features:

  • Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
  • Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
  • Step & direction (PUL/DIR) control
  • Multi-Stepping for smooth motor movement
  • Optically isolated inputs
  • Input voltage 18-30VDC
  • 8 selectable micro-step resolutions of 400-12800 via DIP switches
  • 8 selectable output current settings of 1 – 3.2A via DIP switches
  • Soft-start with no “jump” when powered on
  • Pulse input frequency up to 60 KHz
  • Automatic idle-current reduction
  • Protections for over-voltage and over-current

Electrical Specifications:

  • Output Peak Current: 1~3.2A (2.3 RMS)
  • Input Voltage: +10~30VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~60kHz
  • Isolation Resistance: 100MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 65℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 50℃ MAX
  • Vibration: 10-50Hz / 0.15mm
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.90g (3.5oz)

Resources

Electrical Specification
Control Modes Pulse Mode
Encoder Feedback No
Integrated with Pulser No
No. of Phase 2
Input Voltage(V) 18 - 30 DC
Product Series T Series
Output Current(A) 1.0 - 3.2
Microstep(Steps/rev.) 400 - 12800
Max. Pulse Input(kHZ) 60
Pulse Width(μs) 7.5
Physical Specification
Weight(g) 90
File Size
DM332T.pdf 663.6KB Download
DM332T.STEP 3.1MB Download

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.