Menu
Your Cart

Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires

Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires
$25.49
5 + $23.28
10 + $22.17
50 + $21.06
100 + $19.95
  • Model: 23HS30-3006D
  • Stock Status: 100
  • SKU: 23HS30-3006D

Available Options

This product has a minimum quantity of 20

This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191.2oz.in). A rear shaft can mount encoder, hand wheel or equals.


Electrical Specification

  • Manufacturer Part Number: 23HS30-3006D
  • Motor Type: Unipolar/Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque(Unipolar): 1.35Nm(191.2oz.in)
  • Holding Torque(Bipolar): 1.9Nm(269oz.in)
  • Rated Current/phase(Unipolar): 3.0A
  • Rated Current/phase(Bipolar): 2.12A
  • Phase Resistance(Unipolar): 1.0 ohms
  • Phase Resistance(Bipolar): 2.0 ohms
  • Inductance(Unipolar): 1.6mH ± 20%(1KHz)
  • Inductance(Bipolar): 6.4mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 76mm
  • Shaft Diameter: Φ6.35mm
  • Front Shaft Length: 21mm
  • Rear Shaft Length: 15mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 1kg

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Inductance(mH) 1.6
Phase Resistance(ohm) 1
Rated Current(A) 3
Step Angle(deg.) 1.8
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 135
Holding Torque(oz.in) 191.2
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 76
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type O
Shaft Diameter(mm) 6.35
Shaft Length(mm) 21
No. of Lead 6
Lead Length(mm) 500
Weight(g) 1000
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS30-3006D_Full_Datasheet.pdf 137.22KB Download
23HS30-3006D.STEP 1.92MB Download
23HS30-3006D_Torque_Curve.pdf 196.61KB Download

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 0.88A, with holding torque 0.6Nm (85oz..
$17.56
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz..
$16.09
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x52mm. It has 4 wires, each phase draws 2.0A, with holding torque 0.9Nm (127.5..
$19.69
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127...
$18.39
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127...
$17.99
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.