Menu
Your Cart

Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires

Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires
$27.94
5 + $25.51
10 + $24.30
50 + $23.08
100 + $21.87
  • Model: 23HS30-2804D
  • Stock Status: 100
  • SKU: 23HS30-2804D

Available Options

This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.


Electrical Specification

  • Manufacturer Part Number: 23HS30-2804D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 1.89Nm(267.6oz.in)
  • Rated Current/phase: 2.8A
  • Phase Resistance: 1.13ohms
  • Inductance: 5.4mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 76mm
  • Shaft Diameter: Φ8mm
  • Shaft Length: 21mm
  • D-Cut Length: 15mm
  • Rear Shaft Length: 13.5mm
  • Rear Shaft Diameter: Φ8mm
  • Number of Leads: 4
  • Lead Length: 500mm

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Resources

Electrical Specification
Inductance(mH) 5.4
Phase Resistance(ohm) 1.13
Rated Current(A) 2.8
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 189
Holding Torque(oz.in) 267.6
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 76
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1100
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS30-2804D_Full_Datasheet.pdf 168.4KB Download
23HS30-2804D.STEP 2.46MB Download
23HS30-2804D_Torque_Curve.pdf 173.79KB Download

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz..
$16.09
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with hold..
$25.75
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with hold..
$25.49
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$19.95
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$47.32
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.