Nema 8 Bipolar 1.8deg 4Ncm (5.7oz.in) 0.6A 6V 20x20x38mm 4 Wires










Nema 8 Bipolar 1.8deg 4Ncm (5.7oz.in) 0.6A 6V 20x20x38mm 4 Wires
$17.28
5 + $16.41
10 + $15.55
50 + $14.69
100 + $13.82
- Model: 8HS15-0604S
- Stock Status: 209
- SKU: 8HS15-0604S
Available Options
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in).
Electrical Specification
- Manufacturer Part Number: 8HS15-0604S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 4Ncm(5.7oz.in)
- Rated Current/phase: 0.6A
- Phase Resistance: 11ohms
- Inductance: 5.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 20 x 20mm
- Body Length: 38mm
- Shaft Shape: D-cut
- Shaft Diameter: Φ4mm
- Shaft Length: 10mm
- D-cut Length : 7mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 80g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 8HS15-0604S.pdf
- Torque Curve: 8HS15-0604S Torque Curve.pdf
Electrical Specification | |
Inductance(mH) | 5.5 |
Phase Resistance(ohm) | 11 |
Rated Current(A) | 0.6 |
Step Angle(deg.) | 1.8 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 4 |
Holding Torque(oz.in) | 5.7 |
Physical Specification | |
IP Rating | 40 |
Frame Size(mm) | Nema 08 (20 x 20) |
Body Length(mm) | 38 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | D-Cut |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 10 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 80 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
Tags: 8HS15-0604S, Nema 8 - 20 x 20mm, Output Shaft Type: D-Cut, Shaft Diameter(mm): 4, Shaft Length(mm): 10, No. of Lead: 4, Lead Length(mm): 300, Weight(g): 80, Single Shaft/Dual Shaft: Single Shaft, Holding Torque(Ncm): 4, Rated Current(A): 0.6, Holding Torque(oz.in): 5.7, Bipolar/Unipolar: Bipolar, Step Angle(deg.): 1.8, Phase Resistance(ohm): 11, Inductance(mH): 5.5, Body Length(mm): 38, Frame Size(mm): Nema 08 (20 x 20), IP Rating: 40