Menu
Your Cart

Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires

Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires
$43.27
5 + $39.51
10 + $37.63
50 + $35.74
100 + $33.86
  • Model: 24HS39-4204D
  • Stock Status: 1000
  • SKU: 24HS39-4204D

Available Options

This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.


Electrical Specification

  • Manufacturer Part Number: 24HS39-4204D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 4Nm(566.4oz.in)
  • Rated Current/phase: 4.24A
  • Phase Resistance: 0.7ohms
  • Inductance: 3mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 60 x 60mm
  • Body Length: 100mm
  • Shaft Diameter: Φ8mm
  • Shaft Length: 21mm
  • D-Cut Length: 15mm
  • Rear Shaft Length: 13.5mm
  • Rear Shaft Diameter: Φ8mm
  • Number of Leads: 4
  • Lead Length: 500mm

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Resources

Electrical Specification
Inductance(mH) 3
Phase Resistance(ohm) 0.7
Rated Current(A) 4.24
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 400
Holding Torque(oz.in) 566.4
Physical Specification
IP Rating 40
Frame Size(mm) Nema 24 (60 x 60)
Body Length(mm) 100
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1700
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
24HS39-4204D_Full_Datasheet.pdf 160.28KB Download
24HS39-4204D.STEP 2.07MB Download
24HS39-4204D_Torque_Curve.pdf 146.91KB Download

Write a review

Note: HTML is not translated!
Bad Good
This nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$38.25
This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm (439oz..
$38.25
This is the strongest nema 24 stepper motor, it with step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unip..
$44.47
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 3.5 Nm(495.74oz.in) Ra..
$41.07
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.