Menu
Your Cart

P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires

P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
P Series Nema 24 Bipolar 1.8deg 3.5 Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
$41.07
5 + $39.12
10 + $37.16
50 + $35.21
100 + $33.25
  • Model: 24HP39-5004S
  • In Stocktest: 1968
  • SKU: 24HP39-5004S

Available Options

Electrical Specification

  • Manufacturer Part Number: 24HP39-5004S
  • Number Of Phase: 2
  • Step Angle: 1.8 deg
  • Holding Torque: 3.5 Nm(495.74oz.in)
  • Rated Current/phase: 5.0 A
  • Phase Resistance: 0.48 ohms± 10%
  • Inductance: 1.85 mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 60 x 60 mm
  • Body Length: 97.8 mm
  • Shaft Diameter: Φ10 mm
  • Shaft Length: 21 mm
  • D-cut Length: 15 mm
  • Number of Leads: 4
  • Lead Length: 500 mm
  • Weight: 1.6 kg

Connection

A+
A-
B+
B-
BLK
GRN
RED
BLU

Resources

Electrical Specification
Inductance(mH) 1.85
Phase Resistance(ohm) 0.48
Rated Current(A) 5.0
Step Angle(deg.) 1.8
Holding Torque(Ncm) 350
Holding Torque(oz.in) 495.74
Physical Specification
Frame Size(mm) Nema 24 (60 x 60)
Body Length(mm) 97.8
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-cut
Shaft Diameter(mm) 10
Shaft Length(mm) 21
No. of Lead 4
Lead Length(mm) 500
Weight(g) 1600
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
24HP39-5004S_Full_Datasheet.pdf 182.2KB Download
24HP39-5004S.STEP 1.06MB Download
24HP39-5004S_Torque_Curve.pdf 148.78KB Download

Write a review

Note: HTML is not translated!
Bad Good
This nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$38.25
This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm (439oz..
$38.25
This is the strongest nema 24 stepper motor, it with step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unip..
$44.47
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$43.27
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.