Menu
Your Cart

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x88mm 8 Wires
$38.25
5 + $34.92
10 + $33.26
50 + $31.59
100 + $29.93
  • Model: 24HS34-3008D
  • Stock Status: 151
  • SKU: 24HS34-3008D

Available Options

This nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's holding torque reach 2.2Nm(312oz.in) with unipolar connection and 3.1Nm(439oz.in) with bipolar connection. A rear shaft can mount encoder, hand wheel or equals.


Electrical Specification

  • Manufacturer Part Number: 24HS34-3008D
  • Motor Type: Unipolar/Bipolar
  • Step Angle: 1.8 deg
  • Holding Torque(Bipolar): 3.1Nm(439oz.in)
  • Holding Torque(Unipolar): 2.2Nm(312oz.in)
  • Rated Current(Bipolar Serial): 2.1A
  • Rated Current(Bipolar Parallel): 4.2A
  • Rated Current(Unipolar): 3.0A
  • Phase Resistance(Bipolar Serial): 2.6ohms
  • Phase Resistance(Bipolar Parallel): 0.65ohms
  • Phase Resistance(Unipolar): 1.3ohms
  • Inductance(Bipolar Serial): 12.8mH ± 20%(1KHz)
  • Inductance(Bipolar Parallel): 3.2mH ± 20%(1KHz)
  • Inductance(Unipolar): 3.2mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 60 x 60mm
  • Body Length: 88mm
  • Shaft Diameter: Φ8mm
  • Front Shaft Length: 24mm
  • Rear Shaft Length: 15mm
  • D-cut Length: 20mm
  • Number of Leads: 8
  • Lead Length: 600mm
  • Weight: 1.4kg

Connection

A+
A-
C+
C-
B+
B-
D+
D-
RED
YEL
BLK
BLU
WHT
PUR
GRN
BRN

Resources

Electrical Specification
Inductance(mH) 3.2
Phase Resistance(ohm) 0.65
Rated Current(A) 4.2
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar / Unipolar
Holding Torque(Ncm) 310
Holding Torque(oz.in) 439
Physical Specification
IP Rating 40
Frame Size(mm) Nema 24 (60 x 60)
Body Length(mm) 88
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 24
No. of Lead 8
Lead Length(mm) 600
Weight(g) 1340
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
24HS34-3008D_Full_Datasheet.pdf 151.75KB Download
24HS34-3008D.STEP 1.64MB Download
24HS34-3008D_Torque_Curve.pdf 139.94KB Download

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm (439oz..
$38.25
This is the strongest nema 24 stepper motor, it with step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unip..
$44.47
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$43.27
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 3.5 Nm(495.74oz.in) Ra..
$41.07
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.