Dual Shaft Nema 24 CNC Stepper Motor 3.4Nm (481.6 oz.in) 60x60x100mm 8 Wires
Dual Shaft Nema 24 CNC Stepper Motor 3.4Nm (481.6 oz.in) 60x60x100mm 8 Wires
$44.47
5 + $40.60
10 + $38.67
50 + $36.73
100 + $34.80
- Model: 24HS39-3008D
- Stock Status: 355
- SKU: 24HS39-3008D
Available Options
This is the strongest nema 24 stepper motor, it with step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. A rear shaft can mount encoder, hand wheel or equals. It's holding torque reach 2.48Nm(351.3oz.in) with unipolar connection and 3.4Nm(481.6oz.in) with bipolar connection.
Electrical Specification
- Manufacturer Part Number: 24HS39-3008D
- Motor Type: Unipolar/Bipolar
- Step Angle: 1.8 deg
- Holding Torque(Bipolar): 3.4Nm(481.6oz.in)
- Holding Torque(Unipolar): 2.48Nm(351.3oz.in)
- Rated Current(Bipolar Serial): 2A
- Rated Current(Bipolar Parallel): 4A
- Rated Current(Unipolar): 2.8A
- Phase Resistance(Bipolar Serial): 2.8ohms
- Phase Resistance(Bipolar Parallel): 0.7ohms
- Phase Resistance(Unipolar): 1.4ohms
- Inductance(Bipolar Serial): 12.0mH ± 20%(1KHz)
- Inductance(Bipolar Parallel): 3.0mH ± 20%(1KHz)
- Inductance(Unipolar): 3.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 60 x 60mm
- Body Length: 100mm
- Shaft Diameter: Φ8.0mm
- Front Shaft Length: 24mm
- Rear Shaft Length: 13mm
- D-cut Length: 20mm
- Number of Leads: 8
- Lead Length: 400mm
- Weight: 1.6kg
Connection
A+ | A- | C+ | C- | B+ | B- | D+ | D- |
RED | YEL | BLK | BLU | WHT | ORG | GRN | BRN |
Resources
- Full Datasheet: 24HS39-3008D.pdf
- Torque Curve: 24HS39-3008D Torque Curve.pdf
| Electrical Specification | |
| Inductance(mH) | 3 |
| Phase Resistance(ohm) | 0.7 |
| Rated Current(A) | 4.24 |
| Step Angle(deg.) | 1.8 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 400 |
| Holding Torque(oz.in) | 566 |
| Physical Specification | |
| IP Rating | 40 |
| Frame Size(mm) | Nema 24 (60 x 60) |
| Body Length(mm) | 100 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Output Shaft Type | D-Cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 24 |
| No. of Lead | 8 |
| Lead Length(mm) | 400 |
| Weight(g) | 1600 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
Tags: 24HS39-3008D, Nema 24 - 60 x 60mm, Output Shaft Type: D-Cut, Shaft Diameter(mm): 8, Shaft Length(mm): 24, No. of Lead: 8, Lead Length(mm): 400, Weight(g): 1600, Single Shaft/Dual Shaft: Dual Shaft, Holding Torque(Ncm): 400, Rated Current(A): 4.24, Holding Torque(oz.in): 566, Bipolar/Unipolar: Bipolar, Step Angle(deg.): 1.8, Phase Resistance(ohm): 0.7, Inductance(mH): 3, Body Length(mm): 100, Frame Size(mm): Nema 24 (60 x 60), IP Rating: 40
