Dual Shaft Nema 24 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
$33.27
5 + $31.71
10 + $30.28
50 + $28.98
100 + $27.78
- In Stock: 10000
- Model: 24HS34-3504D
- Gross Weight: 1.50kg
- Certificated: ISO, CE, UKCA, RoHS
Available Options
Ships within 24 hours for items in stock!
This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals.
The applicable bracket for this motor is ST-M2.
Electrical Specification
- Manufacturer Part Number: 24HS34-3504D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8deg
- Holding Torque: 3.1Nm(439oz.in)
- Rated Current/phase: 3.5A
- Phase Resistance: 1.1ohms
- Inductance: 5.6mH±20%(1KHz)
Physical Specification
- Frame Size: 60 x 60mm
- Body Length: 88mm
- Shaft Diameter: Φ8mm
- Front Shaft Length: 24mm
- Rear Shaft Length: 15mm
- D-cut Length: 20mm
- Number of Leads: 4
- Lead Length: 600mm
- Weight: 1.34kg
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Electrical Specification | |
Has Torque/Thrust Curve? | Yes |
Inductance(mH) | 5.6 |
Phase Resistance(ohm) | 1.1 |
Product Type | Hybrid Stepper Motor |
Rated Current(A) | 3.5 |
Step Angle(deg.) | 1.8 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 310 |
Holding Torque(oz.in) | 439 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
IP Rating | 40 |
Frame Size(mm) | Nema 24 (60 x 60) |
Product Series | S |
Body Length(mm) | 88 |
Single Shaft/Dual Shaft | Dual Shaft |
Output Shaft Type | D |
Shaft Diameter(mm) | 8 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 600 |
Weight(g) | 1340 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox