Nema 17 Bipolar 0.9deg 46Ncm (65.1oz.in) 2A 2.9V 42x42x48mm 4 Wires





US FREE SHIPPING





Nema 17 Bipolar 0.9deg 46Ncm (65.1oz.in) 2A 2.9V 42x42x48mm 4 Wires
$15.40
5 + $14.26
10 + $13.69
50 + $13.12
100 + $12.55
- Model: 17HM19-2004S
- Stock Status: 409
Available Options
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm (65.1oz.in).
Full D-Cut version: 17HM19-2004S1
Electrical Specification
- Manufacturer Part Number: 17HM19-2004S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 46Ncm(65.1oz.in)
- Rated Current/phase: 2.0A
- Phase Resistance: 1.45ohms
- Inductance: 4.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 48mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 370g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 17HM19-2004S.pdf
- Torque Curve: 17HM19-2004S Torque Curve.pdf
Electrical Specification | |
Inductance(mH) | 4 |
Phase Resistance(ohm) | 1.4 |
Rated Current(A) | 2 |
Step Angle(deg.) | 0.9 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 46 |
Holding Torque(oz.in) | 65.1 |
Physical Specification | |
Frame Size(mm) | Nema 17 (42 x 42) |
Body Length(mm) | 48 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 400 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
Tags: 17HM19-2004S, Nema 17 - 42 x 42mm, Output Shaft Type: D-Cut, Shaft Diameter(mm): 5, Shaft Length(mm): 24, No. of Lead: 4, Lead Length(mm): 500, Weight(g): 400, Single Shaft/Dual Shaft: Single Shaft, Holding Torque(Ncm): 46, Rated Current(A): 2, Holding Torque(oz.in): 65.1, Bipolar/Unipolar: Bipolar, Step Angle(deg.): 0.9, Phase Resistance(ohm): 1.4, Inductance(mH): 4, Body Length(mm): 48, Frame Size(mm): Nema 17 (42 x 42)