Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 8HS12-0506S
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.8Ncm(2.55oz.in). Electrical Specification Manufacturer Part Number: 8HS12-0506S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 1.8N..
$15.98
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
$10.44
Model: 14HS13-0406S
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A at 10V, with holding torque 10Ncm(14.2oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque..
$8.48
Model: 16HS08-0506S
This unipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 6 wires, each phase draws 0.5A at 6.5V, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS08-0506S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Tor..
$8.15
Model: 17HM13-0316D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A at 12V, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM13-0316D Motor Type: Unipolar Stepper..
$9.46
Model: 17HM13-0316S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A at 12V, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HM13-0316S Motor Type: Unipolar Stepper Step Angle: 0.9deg Hol..
$9.46
Model: 17HM15-0406S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0406S Motor Type: Unipolar Stepper Step Angle: 0.9deg Hold..
$10.11
Model: 17HM15-0806S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x40mm. It has 6 wires, each phase draws current 0.8A at 6V, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0806S Motor Type: Unipolar Stepper Step Angle: 0.9deg Holdi..
$11.30
Model: 17HM19-0406D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 32Ncm(45.3oz.in), A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM19-0406D Motor Type: Unipolar Stepper ..
$11.41
Model: 23HS21-0446S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x54mm. It has 6 wires, each phase draws 0.44A, with holding torque 0.6Nm(84.97oz.in). Electrical Specification Manufacturer Part Number: 23HS21-0446S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0..
$15.65
Model: 17HS13-0316S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0316S Motor Type: Unipolar Stepper Step Angle: 1.8deg ..
$8.48
Model: 17HS13-0956D
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A at 4.0V, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0956D Motor Type: Bipolar Step..
$8.48
Showing 1 to 12 of 21 (2 Pages)