Menu
Your Cart

Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires

Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm (6.1oz.in) 0.95A 2.7V 28x31mm 6 Wires
$13.69
5 + $12.71
10 + $11.98
50 + $11.25
100 + $10.51
  • Model: 11HS12-0956D
  • Stock Status: 100
  • SKU: 11HS12-0956D

Available Options

This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm (6.1oz.in). A 10mm rear shaft was for encoder or equals.


Electrical Specification

  • Manufacturer Part Number: 11HS12-0956D
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 4.3Ncm(6.1oz.in)
  • Rated Current/phase: 0.95A
  • Phase Resistance: 2.8ohms
  • Inductance : 1mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 28 x 28mm
  • Body Length: 31.5mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 20mm
  • Rear Shaft Length : 10mm
  • Number of Leads: 6
  • Lead Length: 300mm
  • Weight: 110g

Connection

A+
O+
A-
B+
O-
B-
RED
BLK
YEL
BLU
ORG
GRN

Resources

Electrical Specification
Inductance(mH) 1
Phase Resistance(ohm) 2.8
Rated Current(A) 0.95
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 4.3
Holding Torque(oz.in) 6.1
Physical Specification
IP Rating
Frame Size(mm) Nema 11 (28 x 28)
Body Length(mm) 31.5
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type O
Shaft Diameter(mm) 5
Shaft Length(mm) 20
Lead Length(mm) 300
Weight(g) 110
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
11HS12-0956D_Full_Datasheet.pdf 135.44KB Download
11HS12-0956D.STEP 1.18MB Download
11HS12-0956D_Torque_Curve.pdf 101.57KB Download

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.