Menu
Your Cart

Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires

Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 11.88V 57*57*54mm 6 wires
$17.99
5 + $16.43
10 + $15.65
50 + $14.86
100 + $14.08
  • Model: 23HS21-0446S
  • Stock Status: 100
  • SKU: 23HS21-0446S

Available Options

This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x54mm. It has 6 wires, each phase draws 0.44A, with holding torque 0.6Nm (84.97oz.in).

Electrical Specification

  • Manufacturer Part Number: 23HS21-0446S
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.6Nm (84.97oz.in)
  • Rated Current/phase: 0.44A
  • Voltage: 11.88V
  • Phase Resistance: 27ohms
  • Inductance: 40mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 54mm
  • Shaft Diameter: Φ6.35mm(1/4 inch)
  • Shaft Length: 20.6mm
  • D-cut Length: 18mm
  • Number of Leads: 6
  • Lead Length: 1400mm

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Inductance(mH) 40
Phase Resistance(ohm) 27
Rated Current(A) 0.44
Step Angle(deg.) 1.8
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 60
Holding Torque(oz.in) 84.97
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 54
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 6.35
Shaft Length(mm) 20.6
No. of Lead 6
Lead Length(mm) 1400

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.