Menu
Your Cart

Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires

Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
Nema 14 Unipolar 1.8deg 10Ncm (14.16oz.in) 0.4A 10V 35x35x34mm 6 Wires
$10.59
5 + $9.75
10 + $9.32
50 + $8.90
100 + $8.48
  • Model: 14HS13-0406S
  • Stock Status: 100
  • SKU: 14HS13-0406S

Available Options

This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A at 10V, with holding torque 10Ncm (14.2oz.in).


Electrical Specification

  • Manufacturer Part Number: 14HS13-0406S
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.1Nm(14.2oz.in)
  • Rated Current/phase: 0.4A
  • Phase Resistance: 25ohms
  • Inductance: 17mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 35 x 35mm
  • Body Length: 34mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 24mm
  • D-Cut Length: 15mm
  • Number of Leads: 6
  • Lead Length: 300mm
  • Weight(g): 170

Connection

A+
O+
A-
B+
O-
B-
RED
BRW
YEL
BLU
ORG
GRN

Resources

Electrical Specification
Inductance(mH) 17
Phase Resistance(ohm) 25
Rated Current(A) 0.4
Step Angle(deg.) 1.8
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 10
Holding Torque(oz.in) 14.2
Physical Specification
IP Rating 40
Frame Size(mm) Nema 14 (35 x 35)
Body Length(mm) 34
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 6
Lead Length(mm) 300
Weight(g) 170

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Nc..
$8.90
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A at 5.4..
$11.58
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.