Menu
Your Cart

Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires

Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6 Wires
$15.40
5 + $14.26
10 + $13.69
50 + $13.12
100 + $12.55
  • Model: 17HM19-0406D
  • Stock Status: 100
  • SKU: 17HM19-0406D

Available Options

This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 32Ncm (45.3oz.in), A rear shaft is available.


Electrical Specification

  • Manufacturer Part Number: 17HM19-0406D
  • Motor Type: Unipolar Stepper
  • Step Angle: 0.9 deg
  • Holding Torque: 32Ncm(45.3oz.in)
  • Rated Current/phase: 0.4A
  • Phase Resistance: 30ohms
  • Inductance: 38mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 24mm
  • D-cut Length: 15mm
  • Rear Shaft Length: 10mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 370g

Connection

A+
O+
A-
B+
O-
B-
RED
BLK
YEL
BLU
ORG
GRN

Resources

Electrical Specification
Inductance(mH) 38
Phase Resistance(ohm) 30
Rated Current(A) 0.4
Step Angle(deg.) 0.9
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 32
Holding Torque(oz.in) 45.3
Physical Specification
Frame Size(mm) Nema 17 (42 x 42)
Body Length(mm) 48
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 6
Lead Length(mm) 500
Weight(g) 350
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
17HM19-0406D_Full_Datasheet.pdf 132.3KB Download
17HM19-0406D.STEP 1.12MB Download

Write a review

Note: HTML is not translated!
Bad Good
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding ..
$12.76
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding ..
$12.76
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding tor..
$13.64
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.8A at 6V, with holding torq..
$15.25
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A at 4.0V, with holding torque..
$10.59
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.