Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive
$30.45
5 + $29.56
10 + $28.72
50 + $27.93
100 + $27.18
- In Stock: 10000
- Model: DM860I
- Gross Weight: 0.70kg
- ETA of US Inventory: 13pcs 15-05-24(dd-mm-yy)
- ETA of DE Inventory: 40pcs 05-06-24(dd-mm-yy)
- Certificated: ISO, CE, UKCA
Available Options
Ships within 24 hours for items in stock!
The DM860I is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability that is suitable for Cnc drive . Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM860I can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM860I an ideal choice for high requirement applications, Cnc drive, etc.
Key Features
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement, works well as Cnc drive as well.
- 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
- Soft-start with no "jump" when powered on
- Input voltage 20-80VDC
- 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, over-curren protection
Electrical Specifications:
- Output Peak Current: 2.4~7.2A(6.0RMS)
- Input Voltage: +20~80VDC
- Logic Signal Current: 7~16mA(Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- Isolation Resistance: 100MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ - 65℃
- Humidity: 40%RH-90%RH
- Operating Temperature: -10℃ - 45℃
- Vibration: 10-55Hz / 0.15mm
- Storage Temperature: -20℃ - 65℃
- Weight: Approx.550g(19.40oz)
Electrical Specification | |
Alarm Output | No |
Brake Output | No |
Control Modes | Pulse Mode |
Encoder Feedback | No |
Input Voltage Reference(V) | 24 - 80DC |
Integrated with Pulser | No |
Max. Output Current RMS(A) | 6.0 |
No. of Phase | 2 |
Product Type | Stepper Motor Driver & Controller |
Input Voltage(V) | 20 - 80DC |
Output Current(A) | 2.4 - 7.2 |
Microstep(Steps/rev.) | 400 - 51200 |
Max. Pulse Input(kHZ) | 200 |
Pulse Width(μs) | 2.5 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Product Series | T Series |
Weight(g) | 550 |