Round Nema 14 0.9deg 9.5Ncm(13.5oz.in) 0.43A Φ36x21.5mm w/ pulley
$14.02
5 + $13.36
10 + $12.76
50 + $12.21
100 + $11.71
- In Stock: 10000
- Model: 14HR09-0434S-C1
- Gross Weight: 0.35kg
- Certificated: ISO, CE, UKCA, RoHS
Available Options
Ships within 24 hours for items in stock!
This custom round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x21.5mm. It has 4 wires, each phase draws 0.43A at 3.83V, with holding torque 9.5Ncm(13.5oz.in). A 20 teeth MXL pulley is available, it's a good choice for camera and monitor.
Electrical Specification
- Manufacturer Part Number: 14HR09-0434S-C1
- Motor Type: Bipolar Stepper
- Step Angle: 0.9deg
- Holding Torque: 9.5Ncm(13.5oz.in)
- Rated Current/phase: 0.425A
- Phase Resistance: 9.0 ohms
- Inductance: 5.0mH±20%(1KHz)
Physical Specification
- Frame Size: Φ36.5mm
- Body Length: 21.5mm
- Shaft Diameter: Φ5mm
- Shaft Length: 11.7mm
- Pulley Profile: MXL
- Number of Teeth: 20
- Pully Pitch: 2.032mm
- Pitch Diameter: Φ12.94
- Addendum Circle Diameter: Φ12.43
- Pully Material: H59 Brass
- Number of Leads: 4 with connector PH-4
- Lead Length: 120mm
- Weight: 130g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Electrical Specification | |
Has Torque/Thrust Curve? | No |
Inductance(mH) | 5 |
Phase Resistance(ohm) | 9 |
Product Type | Hybrid Stepper Motor |
Rated Current(A) | 0.425 |
Step Angle(deg.) | 0.9 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 9.5 |
Holding Torque(oz.in) | 13.5 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Frame Size(mm) | Nema 14 (Φ36) |
Product Series | S |
Body Length(mm) | 21.5 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 11.7 |
No. of Lead | 4 |
Lead Length(mm) | 120 |
Weight(g) | 130 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
File | Size | |
---|---|---|
14HR09-0434S-C1_Full_Datasheet | 143.53KB | Download |