Nema 14 Bipolar 0.9deg 5Ncm (7.08oz.in) 0.5A 5V 35x35x20mm 4 Wires










Nema 14 Bipolar 0.9deg 5Ncm (7.08oz.in) 0.5A 5V 35x35x20mm 4 Wires
$13.64
5 + $12.63
10 + $12.13
50 + $11.62
100 + $11.12
- Model: 14HM08-0504S
- Stock Status: 100
- SKU: 14HM08-0504S
Available Options
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm (7.08oz.in).
Electrical Specification
- Manufacturer Part Number: 14HM08-0504S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 5Ncm(7.08oz.in)
- Rated Current/phase: 0.5A
- Phase Resistance: 10ohms
- Inductance : 8.2mH ± 20%(1KHz)
Physical Specification
- Frame Size: 35 x 35mm
- Body Length: 20mm
- Shaft Diameter: Φ5mm
- Shaft Length: 15mm
- D-cut Length: 10mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 100g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 14HM08-0504S.pdf
- Torque Curve: 14HM08-0504S Torque Curve.pdf
Electrical Specification | |
Inductance(mH) | 8.2 |
Phase Resistance(ohm) | 10 |
Rated Current(A) | 0.5 |
Step Angle(deg.) | 0.9 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 5 |
Holding Torque(oz.in) | 7.08 |
Physical Specification | |
Frame Size(mm) | Nema 14 (35 x 35) |
Body Length(mm) | 20 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 15 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 90 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
Tags: 14HM08-0504S, Nema 14 - 35 x 35mm, Output Shaft Type: D-Cut, Shaft Diameter(mm): 5, Shaft Length(mm): 15, No. of Lead: 4, Lead Length(mm): 300, Weight(g): 90, Single Shaft/Dual Shaft: Single Shaft, Holding Torque(Ncm): 5, Rated Current(A): 0.5, Holding Torque(oz.in): 7.08, Bipolar/Unipolar: Bipolar, Step Angle(deg.): 0.9, Phase Resistance(ohm): 10, Inductance(mH): 8.2, Body Length(mm): 20, Frame Size(mm): Nema 14 (35 x 35)