Nema 23 Integrated Stepper Motor 300Ncm(424.83oz.in) w/ Controller ISC08 12-38VDC
$86.50
5 + $83.54
10 + $80.78
50 + $78.19
100 + $75.77
- In Stock: 10000
- Model: ISC08-30
- Gross Weight: 1.88kg
- Certificated: ISO, CE
Available Options
Ships within 24 hours for items in stock!
Electrical Specifications:
- Manufacturer Part Number: ISC08-30
- Step Angle: 1.8deg
- Holding Torque: 300Ncm(424.83oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications:
- Frame Size: 57 x 57mm
- Body Length: 133mm
- Shaft Diameter: Φ10mm
- Shaft Length: 24mm
- Weight: 1850g
Driver Specifications:
- Output Peak Current: 3 - 8A
- Input Voltage: 12 - 38VDC
- Speed control through external potentiometer 0. 75 - 1250RPM
- Isolation Resistance: More than 100MΩ
- Dielectric strength: 500VAC for 1MIN.
Connection
V+ |
GND |
ENA |
ON |
H/L |
DIR |
Vr |
SPD |
Red |
Black |
Blue |
White |
Yellow |
Green |
Orange |
Purple |
Electrical Specification | |
Control Modes | Pulse Mode |
Encoder Feedback | No |
Inductance(mH) | 3.8 |
Input Voltage Reference(V) | 12 - 36DC |
Integrated with Pulser | Yes |
Phase Resistance(ohm) | 0.9 |
Product Type | Integrated Stepper Motor |
Rated Current(A) | 4.2 |
Input Voltage(V) | 12 - 38DC |
Holding Torque(Ncm) | 300 |
Holding Torque(oz.in) | 424.83 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
IP Rating | 40 |
Frame Size(mm) | Nema 23 (57 x 57) |
Body Length(mm) | 133 |
Shaft Diameter(mm) | 10 |
Shaft Length(mm) | 24 |