Menu
Your Cart
Free Shipping fullfill by Amazon in the U.S.

Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires

Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
Nema 34 CNC Stepper Motor 7.07Nm (1001oz.in) 86x86x98mm 8 Wires
$73.10
5 + $66.75
10 + $63.57
50 + $60.39
100 + $57.21
  • Model: 34HS38-3008S
  • In Stock: 119
  • SKU: 34HS38-3008S

Available Options

This nema 34 cnc stepper motor with size 86x86x98mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 5Nm(708oz.in) with unipolar connection and 7.07Nm(1001oz.in) with bipolar connection.


Electrical Specification

  • Manufacturer Part Number: 34HS38-3008S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque(Unipolar): 5Nm(708oz.in)
  • Holding Torque(Bipolar): 7.07Nm(1001oz.in)
  • Rated Current/phase(Unipolar): 3.0A
  • Rated Current/phase(Bipolar Serial): 2.12A
  • Rated Current/phase(Unipolar Parallel): 4.24A
  • Phase Resistance(Unipolar): 1.6ohms
  • Phase Resistance(Bipolar Serial): 3.2ohms
  • Phase Resistance(Bipolar Parallel): 0.8ohms
  • Inductance(Unipolar): 8.0mH ± 20%(1KHz)
  • Inductance(Bipolar Serial): 32.0mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 98mm
  • Shaft Diameter: Φ12.7mm
  • Shaft Length: 32mm
  • D-cut Length: 25mm
  • Number of Leads: 8
  • Lead Length: 500mm
  • Weight: 3.2kg

Connection

A+
A-
C+
C-
B+
B-
D+
D-
BLU
BLK
WHT
ORG
RED
GRN
YEL
BRN

Resources

Electrical Specification
Inductance(mH) 8
Phase Resistance(ohm) 0.8
Rated Current(A) 4.24
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar / Unipolar
Holding Torque(Ncm) 707
Holding Torque(oz.in) 1001
Physical Specification
IP Rating 40
Frame Size(mm) Nema 34 (86 x 86)
Body Length(mm) 98
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 12.7
Shaft Length(mm) 32
No. of Lead 8
Lead Length(mm) 500
Weight(g) 3130

Write a review

Note: HTML is not translated!
Bad Good
Captcha
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312..
$50.61
This Nema 34 cnc stepper motor with size 86x86x80mm. It has 4 wires, each phase draws 5.5A, with holding torque 4.5Nm (637oz.in). Electrical Specific..
$59.23
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$58.11
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$83.29
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 85.8x85.8x68mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.4N.m ..
$50.83
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.