Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

$12.45

(92)

Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

     0 reviews  |  Write a review
SKU: 23HS16-2804D
$12.45

Bulk quantity price break:

Qty 3 10 30 100
Price $11.82 $11.20 $10.58 $9.96
Save 5% 10% 15% 20%
Availability: 92

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz.in), a rear shaft is made for encoder or equals.

Electrical Specification

  • Manufacturer Part Number: 23HS16-2804D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.55Nm(78oz.in)
  • Rated Current/phase: 2.8A
  • Voltage: 2V
  • Phase Resistance: 0.7ohms
  • Inductance: 1.4mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 41mm
  • Shaft Diameter: Φ6.35mm
  • Shaft Length: 19.05mm
  • D-cut Length: 15mm
  • Rear Shaft Length : 15mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 470g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 55
Holding Torque(oz.in) 78
Inductance(mH) 1.4
Phase Resistance(ohm) 0.7
Rated Current(A) 2.8
Step Angle(°) 1.8
Physical Specification
Body Length(mm) 41
Frame Size(mm) 57x57
Single Shaft/Dual Shaft Single Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 6.35
Shaft Length(mm) 19.05
No. of Lead 4
Lead Length(mm) 500
Weight(g) 500

Reviews Over Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

Total Reviews (0)
click here write review to add review for this product.


Do you have any questions about Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires?