Menu
Your Cart

Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires

Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires
$12.26
5 + $11.21
10 + $10.69
50 + $10.17
100 + $9.65
  • Model: 17HS19-1684D
  • Stock Status: 359
  • SKU: 17HS19-1684D

Available Options

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm (62.3oz.in). It's very good choice for 3D printer, a rear shaft is available.


Electrical Specification

  • Manufacturer Part Number: 17HS19-1684D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 44Ncm(62.3oz.in)
  • Rated Current/phase: 1.68A
  • Phase Resistance: 1.65ohms
  • Inductance: 2.8mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 24mm
  • Rear Shaft Length: 13mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 390g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 2.8
Phase Resistance(ohm) 1.65
Rated Current(A) 1.68
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 44
Holding Torque(oz.in) 62.3
Physical Specification
IP Rating 40
Frame Size(mm) Nema 17 (42 x 42)
Body Length(mm) 48
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type O
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 500
Weight(g) 400
File Size
17HS19-1684D_Full_Datasheet.pdf 139.97KB Download
17HS19-1684D.STEP 1.12MB Download
17HS19-1684D_Torque_Curve.pdf 140.12KB Download

Write a review

Note: HTML is not translated!
Bad Good
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 0.4A at 12V, with holding torque 32Nc..
$12.00
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A at 5.3V, with holding to..
$12.00
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase dra..
$12.00
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A at 4.0V, with holding torque..
$10.59
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, wit..
$12.26
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.