Menu
Your Cart

Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
$16.09
5 + $14.72
10 + $14.03
50 + $13.35
100 + $12.66
  • Model: 23HS16-2804D
  • Stock Status: 100
  • SKU: 23HS16-2804D

Available Options

This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz.in), a rear shaft is made for encoder or equals.


Electrical Specification

  • Manufacturer Part Number: 23HS16-2804D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.55Nm(78oz.in)
  • Rated Current/phase: 2.8A
  • Phase Resistance: 0.7ohms
  • Inductance: 1.4mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 41mm
  • Shaft Diameter: Φ6.35mm
  • Shaft Length: 19.05mm
  • D-cut Length: 15mm
  • Rear Shaft Length : 15mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 470g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 1.4
Phase Resistance(ohm) 0.7
Rated Current(A) 2.8
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 55
Holding Torque(oz.in) 78
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 41
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 6.35
Shaft Length(mm) 19.05
No. of Lead 4
Lead Length(mm) 500
Weight(g) 500
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS16-2804D_Full_Datasheet.pdf 143.54KB Download
23HS16-2804D.STEP 1.92MB Download

Write a review

Note: HTML is not translated!
Bad Good
This round bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x52mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.7Nm (99..
$21.60
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 0.88A, with holding torque 0.6Nm (85oz..
$17.56
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191..
$25.49
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$19.95
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$27.94
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.