- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor 5 7
SKU: DM860T
$45.75
Bulk quantity price break:
Qty | 5 | 10 | 50 | 100 |
---|---|---|---|---|
Price | $44.40 | $43.06 | $41.71 | $40.37 |
Save | 3% | 6% | 9% | 12% |
Availability: 295
askquestion
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM860T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM860T an ideal choice for high requirement applications.
Key Features
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
- Soft-start with no "jump" when powered on
- Input voltage 18-80VAC or 36-110VDC
- 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, over-curren protection
Electrical Specifications:
- Output Peak Current: 2.4~7.2A (6.0 RMS)
- Input Voltage: +18~80VAC or 36~110VDC
- Logic Signal Current: 7~16mA (Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- Isolation Resistance: 100MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ - 65℃
- Humidity: 40%RH-90%RH
- Operating Temperature: -10℃ - 45℃
- Vibration: 10-55Hz / 0.15mm
- Storage Temperature: -20℃ - 65℃
- Weight: Approx.580g (20.46oz)
Resources
- Manual: DM860T.pdf
Stepper Driver Specification | |
Input Voltage(V) | AC18 - 80 / DC36 - 110 |
Output Current(A) | 2.4 - 7.2 |
Microstep(Steps/rev.) | 400 - 51200 |
Max. Pulse Input(kHZ) | 200 |
Pulse Width(μs) | 2.5 |
Physical Specification | |
Weight(g) | 580 |