Menu
Your Cart

Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in) 0.67A 3.75V 28x28x31.5mm 4 Wires

Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in)  0.67A  3.75V  28x28x31.5mm  4 Wires
Dual Shaft Nema 11 Bipolar 1.8deg 7Ncm (9.91oz.in) 0.67A 3.75V 28x28x31.5mm 4 Wires
$14.60
5 + $13.56
10 + $12.78
50 + $12.00
100 + $11.21
  • Model: 11HS12-0674D
  • Stock Status: 100
  • SKU: 11HS12-0674D

Available Options

This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A at 3.75V, with holding torque 7Ncm (9.91oz.in).


Electrical Specification

  • Manufacturer Part Number: 11HS12-0674D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 7Ncm(9.91oz.in)
  • Rated Current/phase: 0.67A
  • Phase Resistance: 5.6ohms
  • Inductance: 4mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 28 x 28mm
  • Body Length: 31.5mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 20mm
  • Rear Shaft Diameter:4mm
  • Rear Shaft Length:12mm
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight: 110g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 4
Phase Resistance(ohm) 5.6
Rated Current(A) 0.67
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 7
Holding Torque(oz.in) 9.91
Physical Specification
IP Rating 40
Frame Size(mm) Nema 11 (28 x 28)
Body Length(mm) 31.5
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type O
Shaft Diameter(mm) 5
Shaft Length(mm) 20
Lead Length(mm) 300
Weight(g) 110
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
11HS12-0674D_Full_Datasheet.pdf 178.62KB Download
11HS12-0674D.STEP 1.15MB Download

Write a review

Note: HTML is not translated!
Bad Good
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torqu..
$13.20
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm ..
$13.69
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A at 4.6V, with holding torque 9.5..
$15.13
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A at 6.2V, with holding torque 12N..
$16.14
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A at 6.2V, ..
$18.07
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.