Model: 17HS08-1004S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer extruder.
Electrical Specification
..
$10.72
Model: Vacuum-Rated
Vacuum Rated Stepper Motor
Suitable for use in vacuum/high/low temperature environments
Vacuum level: Max. 1.0x10^-7Pa
Radiation resistant: 10^6Gy
Low outgassing rate
Power consumption optimized design
Heat dissipation compliant
Low vibration
Withstand high amplitude vibration
Traceabilit..
$0.00
Model: 17HS19-2004S1-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
$16.27
Model: 17HS19-2504S-H
This custom-made high temperature rated NEMA 17 stepper motor is special for VORON printers. It offers a 1.8 degree step angle and high torque with a 48mm body length for use in environments up to 180C.
Electrical Specification
Manufacturer Part Number: 17HS19-2504S-H
Motor Type: Bipolar S..
$17.99
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
$18.38
Model: 23HS30-2804S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-H
Motor ..
$31.39
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
$23.17
Model: 17IP65-06
Electrical Specification
Manufacturer Part Number: 17IP65-06
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.59Nm(83.57oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.5ohms
Inductance: 3.0mH±20%(1KHz)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 47mm
Sha..
$14.96
Model: 17IP67-06
This Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrica..
$22.35
Model: 14RE08-1004S-H
This motor is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temperature reach up to 180Cdegree. This motor is widely used in 3D Printer.
Electrical Specification
Manuf..
$10.80
Model: 16HS16-0304S-C1
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with holding torque 8Ncm(11.33oz.in).
Electrical Specification
Manufacturer Part Number: 16HS16-0304S-C1
Motor Type: Bipolar Stepper
Step Angle: 1..
$7.48
Model: 23E1KIP65-12
This closed loop nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification..
$69.50