- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 16 Bipolar 0.9deg 25Ncm (35.4oz.in) 0.3A 12V 39x39x44mm 4 Wires
Nema 16 Bipolar 0.9deg 25Ncm (35.4oz.in) 0.3A 12V 39x39x44mm 4 Wires
Nema 16 Bipolar 0.9deg 25Ncm (35.4oz.in) 0.3A 12V 39x39x44mm 4 Wires
5
1
SKU: 16HM17-0304S
$14.60
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $13.52 | $12.98 | $12.44 | $11.89 |
| Save | 7% | 11% | 15% | 19% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A at 12V, with holding torque 25Ncm (35.4oz.in).
Electrical Specification
- Manufacturer Part Number: 16HM17-0304S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 25Ncm(35.4oz.in)
- Rated Current/phase: 0.3A
- Voltage: 12V
- Phase Resistance: 40ohms
- Inductance : 110mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 44mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight : 270g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 16HM17-0304S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 25 |
| Holding Torque(oz.in) | 35.4 |
| Inductance(mH) | 110 |
| Phase Resistance(ohm) | 40 |
| Rated Current(A) | 0.3 |
| Step Angle(°) | 0.9 |
| Physical Specification | |
| Body Length(mm) | 44 |
| Frame Size(mm) | 39 x 39 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 250 |
