Menu
Your Cart

Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires

Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
Nema 16 Bipolar 0.9deg 16Ncm (22.7oz.in) 0.6A 6V 39x39x25mm 4 Wires
$12.32
5 + $11.41
10 + $10.95
50 + $10.50
100 + $10.04
  • Model: 16HM10-0604S
  • Stock Status: 300
  • SKU: 16HM10-0604S

Available Options

This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x25mm. It has 4 wires, each phase draws 0.6A at 6V, with holding torque 16Ncm (22.7oz.in).


Electrical Specification

  • Manufacturer Part Number: 16HM10-0604S
  • Motor Type: Bipolar Stepper
  • Step Angle: 0.9 deg
  • Holding Torque: 16Ncm(22.7oz.in)
  • Rated Current/phase: 0.6A
  • Phase Resistance: 10ohms
  • Inductance: 15.5mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 39 x 39mm
  • Body Length: 25mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 24mm
  • D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight: 150g

Connection

A+
A-
B+
B-
Black
Red
Green
Blue

Resources

Electrical Specification
Inductance(mH) 15.5
Phase Resistance(ohm) 10
Rated Current(A) 0.6
Step Angle(deg.) 0.9
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 16
Holding Torque(oz.in) 22.7
Physical Specification
Frame Size(mm) Nema 16 (39 x 39)
Body Length(mm) 25
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 300
Weight(g) 120
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
16HM10-0604S_Full_Datasheet.pdf 136.88KB Download
16HM10-0604S.STEP 1.22MB Download
16HM10-0604S_Torque_Curve.pdf 101.04KB Download

Write a review

Note: HTML is not translated!
Bad Good
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x22mm. It has 4 wires, each phase draws 1.2 A at 3.6V, with holding torque 11N..
$12.32
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 18Ncm..
$12.76
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A at 12V, with holding torque 25Ncm..
$15.40
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 4 wires, each phase draws 0.6A at 3.96V, with holding torque 8.7..
$10.19
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A, with holding torque 18Ncm (25.5..
$10.59
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.