Nema 16 Bipolar 1.8deg 18Ncm (25.5oz.in) 0.65A 39x39x34mm 4 Wires












Nema 16 Bipolar 1.8deg 18Ncm (25.5oz.in) 0.65A 39x39x34mm 4 Wires
$10.59
5 + $9.75
10 + $9.32
50 + $8.90
100 + $8.48
- Model: 16HS13-0654S
- Stock Status: 100
- SKU: 16HS13-0654S
Available Options
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A, with holding torque 18Ncm (25.5oz.in).
Electrical Specification
- Manufacturer Part Number: 16HS13-0654S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 18Ncm(25.5oz.in)
- Rated Current/phase: 0.65A
- Phase Resistance: 7ohms
- Inductance: 9.3mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 190g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 16HS13-0654S.pdf
Electrical Specification | |
Inductance(mH) | 9.3 |
Phase Resistance(ohm) | 7 |
Rated Current(A) | 0.65 |
Step Angle(deg.) | 1.8 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 18 |
Holding Torque(oz.in) | 25.5 |
Physical Specification | |
IP Rating | 40 |
Frame Size(mm) | Nema 16 (39 x 39) |
Body Length(mm) | 34 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 180 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
Tags: 16HS13-0654S,
Nema 16 - 39 x 39mm,
Output Shaft Type: D-Cut,
Shaft Diameter(mm): 5,
Shaft Length(mm): 20,
No. of Lead: 4,
Lead Length(mm): 300,
Weight(g): 180,
Single Shaft/Dual Shaft: Single Shaft,
Holding Torque(Ncm): 18,
Rated Current(A): 0.65,
Holding Torque(oz.in): 25.5,
Bipolar/Unipolar: Bipolar,
Step Angle(deg.): 1.8,
Phase Resistance(ohm): 7,
Inductance(mH): 9.3,
Body Length(mm): 34,
Frame Size(mm): Nema 16 (39 x 39),
IP Rating: 40