Products
Your Cart

Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm

Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
$78.74
5 + $71.89
10 + $68.47
50 + $65.05
100 + $61.62
  • Model: 34HS46-5004D
  • Stock Status: 521

Available Options

This Nema 34 dual shaft stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A rear shaft can mount encoder, hand wheel or equals.


Electrical Specification

  • Manufacturer Part Number: 34HS46-5004D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 8.5Nm(1204oz.in)
  • Rated Current/phase: 5.0A
  • Phase Resistance: 1.0ohms
  • Inductance: 11mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 114mm
  • Shaft Diameter: Φ14mm
  • Front Shaft Length: 37mm
  • Rear Shaft Length: 34mm
  • D-cut Length: 25mm
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight: 3.6kg

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Resources

Electrical Specification
Inductance(mH) 11
Phase Resistance(ohm) 1
Rated Current(A) 5
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 850
Holding Torque(oz.in) 1204
Physical Specification
IP Rating 40
Frame Size(mm) Nema 34 (86 x 86)
Body Length(mm) 114
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 4
Lead Length(mm) 300
Weight(g) 3600
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
34HS46-5004D_Full_Datasheet.pdf 153.81KB Download
34HS46-5004D.STEP 2.23MB Download
34HS46-5004D_Torque_Curve.pdf 158.53KB Download

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.