Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector 17HS19-2004S1

Hybrid - Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector

$11.41

$8.45

(10000)

Hybrid - Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector

     1 reviews  |  Write a review
SKU: 17HS19-2004S1
$8.45 $11.41

Bulk quantity price break:

Qty 3 10 30 100
Price $8.24 $8.03 $7.82 $7.61
Save 28% 30% 31% 33%
Availability: 10000
askquestion

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications.

Electrical Specification

  • Manufacturer Part Number: 17HS19-2004S1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 59Ncm(84oz.in)
  • Rated Current/phase: 2.0A
  • Voltage: 2.8V
  • Phase Resistance: 1.4ohms
  • Inductance: 3.0mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 47mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 24mm
  • Double D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 1000mm
  • Weight: 390g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Step Angle(°) 1.8
Holding Torque (Ncm) 59
Holding Torque (oz.in) 84
Rated Current (A) 2
Phase Resistance(ohm) 1.4
Inductance(mH) 3
Physical Specification
Frame Size(mm) 42x42
Body Length(mm) 48
Signal Shaft/Dual Shaft Single Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 1000
Weight(g) 400

Write a review

Note: HTML is not translated!

Do you have any questions about Hybrid - Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/ 1m Cable & Connector?