Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector














Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
$8.67
5 + $8.21
10 + $7.76
50 + $7.30
100 + $6.85
- Model: 17HS15-1504S-X1
- In Stock: 456
- SKU: 17HS15-1504S-X1
Available Options
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).
3-PACK only need $22.15, here is the link 3-17HS15-1504S-X1
5-PACK only need $36.91, here is the link 5-17HS15-1504S-X1
Electrical Specification
- Manufacturer Part Number: 17HS15-1504S-X1
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 45Ncm(63.74oz.in)
- Rated Current/phase: 1.50A
- Phase Resistance: 2.3ohms
- Inductance: 4.4mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 39mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 280g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 17HS15-1504S-X1.pdf
- Motor with 300mm length cable:17HS15-1504S-X
Electrical Specification | |
Inductance(mH) | 4.4 |
Phase Resistance(ohm) | 2.3 |
Rated Current(A) | 1.5 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 45 |
Holding Torque(oz.in) | 63.74 |
Physical Specification | |
IP Rating | 40 |
Body Length(mm) | 39 |
Single Shaft/Dual Shaft | Single Shaft |
Output Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 1000 |
Weight(g) | 280 |
Tags: 17HS15-1504S-X1,
Nema 17 - 42 x 42mm,
Output Shaft Type: D-Cut,
Shaft Diameter(mm): 5,
Shaft Length(mm): 24,
No. of Lead: 4,
Lead Length(mm): 1000,
Weight(g): 280,
Single Shaft/Dual Shaft: Single Shaft,
Holding Torque(Ncm): 45,
Rated Current(A): 1.5,
Holding Torque(oz.in): 63.74,
Bipolar/Unipolar: Bipolar,
Phase Resistance(ohm): 2.3,
Inductance(mH): 4.4,
Body Length(mm): 39,
IP Rating: 40