TS Series 3 Axis 4.0Nm(566.56oz.in) Nema 24 Closed Loop Stepper Kit w/ Power Supply
$267.53
5 + $258.38
10 + $249.84
50 + $241.85
100 + $234.35
- In Stock: 10000
- Model: 3-CLTS40-V41
- Gross Weight: 10.80kg
- Certificated: ISO, CE
Available Options
Ships within 24 hours for items in stock!
This CNC kit included:
- 3 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
- 3 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.0Nm/566.56oz.in Encoder 1000PPR
- 1 x S-500-48: 500W 48V 5.0A 115/230V Switching Power Supply Stepper Motor CNC Router Kits
- 1 x CABLE-PC-1: RS232 Debugging Cable
- 3 x CE2M: 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepper Motor
- 3 x CM2M-20: AWG20 1.7m(67") Long Motor Extension Cable with GX16 Aviation Plug
The extension cable is also available in lengths of 2.7m and 4.7m. You can replace it by paying the price difference. If necessary, please leave a message with the length you expect.
The CL57T in this kit is the latest 4.1 version, which compared to the 4.0 version, opens up the RS232 interface and provides a debugging cable for free, making it more convenient to configure parameters.
Each order comes with a free debugging cable: RS232 Cable for Driver CL57T(V4.1), CL86T(V4.1), CL57RS, CL86RS, DM556RS and DM882RS.
Motor Specification
- Manufacturer Part Number: 24HS40-5004D-E1000
- Number of phase: 2
- Step Angle: 1.8deg
- Holding Torque: 4.0Nm(566.56oz.in)
- Rated Current/phase: 5.0A
- Phase Resistance: 0.60ohms
- Inductance: 2.6mH ± 20%(1KHz)
- Frame Size: 60 x 60mm
- Body Length: 100mm
- Shaft Diameter: Φ10mm
- Shaft Length: 21mm
- D-CUT Shaft Length: 15mm
- Lead Length: 300mm
Encoder Specification
- Output Circuit Type: Differential type
- Encoder Resolution: 1000CPR
- Output Signal Channels: 3 channels
- Supply Voltage Min: 4.5V
- Supply Voltage Max: 5.5V
- Output Current: 100mA MAX
- Output High Voltage: ≥Vcc-0.4V
- Output Low Voltage: ≤0.4V
- Output Frequency Max: 1.85MHZ
Motor and Encoder Connection
PIN |
1 |
2 |
3 |
4 |
Motor |
A+ |
A- |
B+ |
B- |
PIN |
2 |
3 |
1 |
13 |
11 |
12 |
Encoder |
VCC |
EGND |
EA+ |
EA- |
EB+ |
EB- |
Motor Extension Cable Connection
PIN |
1 |
2 |
3 |
4 |
Color |
White |
Green |
Blue |
Black |
Or
PIN |
1 |
2 |
3 |
4 |
Color |
Black |
Green |
Red |
Blue |
Encoder Extension Cable Connection
PIN |
2 |
3 |
1 |
13 |
11 |
12 |
Color |
Red |
White |
Black |
Blue |
Yellow |
Green |
PLEASE NOTE: The thick black wire can be used for shielding, but it is not required, so you can leave it unconnected.
Driver Specification
- Input voltage 24-48VDC, output peak current 0-8.0A
- Closed-loop, eliminates loss of synchronization
- RS232 debugging interface available
- Do not need a high torque margin
- Broader operating speed range
- Reduced motor heating and more efficient
- Smooth motion and super-low motor noise
- Protections for over-voltage, over-current and position following error
Power Supply Specification
- 48V DC 10.5A output
- AC input voltage range:92~135V/180~264VAC
- 115V/230V AC selected by switch
- High efficiency low cost
- Forced air cooling by built-in DC fan
- Low output ripple and yawp
- Over current, over voltage, short circuit and overheat protections
- 215*115*50mm(L*W*H)
Electrical Specification | |
Has Torque/Thrust Curve? | Yes |
Inductance(mH) | 2.6 |
Input Voltage Reference(V) | 24 - 48DC |
Phase Resistance(ohm) | 0.6 |
Product Type | Closed Loop Stepper Kit |
Rated Current(A) | 5.0 |
Holding Torque(Ncm) | 400 |
Holding Torque(oz.in) | 566.56 |
Number of Axes | 3 |
Encoder Type | Optical Incremental |
Output Circuit Type | Differential type |
Encoder Resolution | 1000PPR |
Output Signal Channels | 3 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Frame Size(mm) | Nema 24 (60 x 60) |
Product Series | TS Series |
Output Shaft Type | D |
Shaft Diameter(mm) | 10 |
Shaft Length(mm) | 21 |