Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor














- Model: CL57T
- Stock Status: 426
- SKU: CL57T
Available Options
This Closed-loop Stepper Driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.
If you want to buy the new V4.0 version, you can only choose to ship from the Chinese warehouse, other overseas warehouses can only offer the old V3.0 version at the moment.
Key Features:
- Input voltage 24-48VDC, output peak current 0-8A
- Closed-loop, eliminates loss of synchronization
- No Tuning and always stable
- Do not need a high torque margin
- Broader operating speed range
- Reduced motor heating and more efficient
- Smooth motion and super-low motor noise
- Protections for over-voltage, over-current and position following error
Electrical Specifications:
- Output Peak Current: 0~8A
- Input Voltage: +24~48VDC (Typical 36VDC)
- Logic Signal Current: 7~16mA (Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- Isolation Resistance: 500MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ - 65℃
- Humidity: 40%RH-90%RH
- Operating Temperature: 0℃ - 50℃
- Vibration: 10-50Hz / 0.15mm
- Storage Temperature: -20℃ - 65℃
- Weight: Approx.280g (9.9oz)
Resources
- RS232 Cable: RS232-1
- RS232 Adapter Cable to USB 2.0: C003
- Manual: CL57T_V4.0.pdf, CL57T_V3.0.pdf
- Software: Version MS10E, Version MS31B
- Software Manual: CL42T & CL57T
Electrical Specification | |
Control Modes | Pulse Mode |
Encoder Feedback | Yes |
Integrated with Pulser | No |
No. of Phase | 2 |
Input Voltage(V) | 24 - 48 DC |
Product Series | T Series |
Output Current(A) | 0 - 8.0 |
Microstep(Steps/rev.) | 200 - 40000 |
Max. Pulse Input(kHZ) | 200 |
Pulse Width(μs) | 2.5 |