3 Axis Stepper CNC Kit 3.0Nm(425oz.in) 4.2A Nema 23 Stepper Motor & Driver DM556T & 48V Power Supply

     0 reviews  |  Write a review
SKU: 3-DM556T-S30
$188.02

Bulk quantity price break:

Qty 5 10 50 100
Price $182.14 $176.27 $170.39 $164.52
Save 3% 6% 9% 12%
Availability: 100

Qty

askquestion
This CNC kit included:
  • 3 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T
  • 3 x Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC
  • 1 x 500W 48V 10.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

Motor Specification

  • Manufacturer Part Number: 23HS45-4204S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 3.0Nm(425oz.in)
  • Rated Current/phase: 4.2A
  • Phase Resistance: 0.9ohms
  • Inductance: 3.8mH ± 20%(1KHz)
  • Frame Size: 57 x 57mm
  • Body Length: 113 mm
  • Shaft Diameter: Φ10mm
  • Shaft Length: 24mm
  • D-cut Length: 20mm
  • Number of Leads: 4
  • Lead Length: 400mm

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Driver Specification

  • Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
  • Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
  • Step & direction (PUL/DIR) control
  • Multi-Stepping for smooth motor movement
  • TTL compatible and optically isolated inputs
  • Input voltage 20-50VDC
  • 16 selectable micro-step resolutions of 400-25,600 via DIP switches
  • 8 selectable output current settings of 1.8 - 5.6A via DIP switches
  • Soft-start with no "jump" when powered on
  • Pulse input frequency up to 200 KHz
  • Automatic idle-current reduction
  • Protections for over-voltage and over-current

Power Specification

  • 48V DC 10.5A output
  • AC input voltage range: 90~135VAC/180~264VAC
  • High efficiency low cost
  • Forced air cooling by built-in DC fan
  • Low output ripple and yawp
  • Over current, over voltage, short circuit and overheat protections
  • 215*115*50mm (L*W*H)

Resources

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about 3 Axis Stepper CNC Kit 3.0Nm(425oz.in) 4.2A Nema 23 Stepper Motor & Driver DM556T & 48V Power Supply?

Captcha