Menu
Your Cart

Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm

Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
Nema 14 External 35mm Stack 0.57A Lead 1.27mm/0.05" Length 150mm
$64.42
5 + $62.34
10 + $60.27
50 + $58.19
100 + $56.11
  • Model: 14E13S0574FF-150RS
  • Stock Status: 100

Available Options

This model is almost exactly same as Haydon Kerk 35000 series size 14 external stepper motor linear actuator. The motor part is 35mm body 1.8 degree 0.57A Nema 14 stepper motor, and it has integrated with a 6.35mm (0.25") diameter 150mm (5.9055") length lead screw and a POM screw nut, the linear travel is 1.27mm (0.05") per revolution.


Electrical Specification

  • Manufacturer Part Number: 14E13S0574FF-150RS
  • Motor Type: External Linear Stepper
  • Step Angle: 1.8°
  • Minimal Thrust: 168N (300pps)
  • Rated Current/phase: 0.57A
  • Phase Resistance: 8.8ohms
  • Voltage: 5V
  • Inductance: 13mH±20%(1KHz)

Physical Specification

  • Frame Size: 35 x 35mm
  • Body Length: 35mm
  • Lead Screw Length: 150mm(5.9055")
  • Lead Screw Diameter: Φ6.35mm(0.25")
  • Lead/Step: 0.00635mm(0.00635" )
  • Lead Travel/Revolution: 1.27mm(0.05")
  • Number of Leads: 4
  • Lead Length: 300mm
  • Weight : 162g

Connection

A+
A-
B+
B-
Red
Red/White
Green/White
Green

Resources

Electrical Specification
Inductance(mH) 13
Linear Motor Type External
Minimal Thrust(N) 168
Phase Resistance(ohm) 8.8
Rated Current(A) 0.57
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Physical Specification
Lead Screw Diameter(mm) 6.35
Lead Screw Length(mm) 150
Lead Travel/Revolution(mm) 1.27
Lead Travel/Step(mm) 0.00635
Frame Size(mm) Nema 14 (35 x 35)
Body Length(mm) 34.5
No. of Lead 4
Lead Length(mm) 300
  • Lead Screw End Machining

    • Male/female threaded ends to specified thread and pitch
    • Custom-machined journals and ring groove
    • Hex or square ends
    • Keyways and cross holes

  • Anti-Backlash Nut

  • STEPPERONLINE provides anti-backlash nut for external lead screw linear actuator (except Size 34) and non-captive lead screw linear actuator (except size 24 and 34).
    There should be a nominal backlash between lead screw and STEPPERONLINE standard plastic nut after millions of cycles. STEPPERONLINE guarantees few millions of cycles but physical backlash can be increased. To reduce or eliminate backlash, STEPPERONLINE provides spring pressure structure of anti-backlash nut.

  • Encoders

  • According to application requirements, customer can easily choose encoders via index output or non-index type and thru output method as single ended or differential output.
    Also various resolution can be chosen freely for easier and precise positioning.
    All STEPPERONLINE standard encoders are optical and incremental. When you choose encoder, please carefully look into options especially size, resolution, index and output method.

  • Brakes

  • Especially Vertical applications or holding motors from sudden power-off status, STEPPERONLINE standard power-off brakes for NEMA14, 17, 23, 24 and 34 sizes will be helpful to reduce concern of customers.

  • Wiring, Cabling and Connectors

    • Flying wire leads or connectors
    • Twisting wire leads
    • Heat shrink or expandable tubing
    • Cable housings

  • Teflon Coated Screw

  • If customer's applications require greaseless screw and nut combination, STEPPERONLINE offers teflon coated lead screw of stepper linear actuator.
    Teflon coated lead screw stepper linear actuator enables it's longer life cycle and better thrust force generation against conventional SUS lead screw.
    Teflon coating can be applied in the whole range of lead screw options in STEPPERONLINE and all types of linear actuators such as External, Non-Captive, and Captive.
    In addition, Anti-backlash nut also can be combined with teflon coated screw too.

File Size
14E13S0574FF-150RS_Full_Datasheet.pdf 148.86KB Download

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.