4 Axis CNC Router Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver DM556T
$191.07
5 + $185.49
10 + $180.23
50 + $175.26
100 + $170.56
- In Stock: 10000
- Model: 4-DM556T-S30
- Gross Weight: 10.25kg
- Certificated: ISO, CE, UKCA
Available Options
Ships within 24 hours for items in stock!
This CNC kit includs:
- 4 x Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor
- 4 x Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC
- 2 x 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor CNC Router Kits
Driver Specification
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
- Step & direction(PUL/DIR) control
- Multi-Stepping for smooth motor movement
- TTL compatible and optically isolated inputsto 5.6A
- Input voltage 20-50VDC
- 16 selectable micro-step resolutions of 400-25,600 via DIP switches
- 8 selectable output current settings of 1.8A to 5.6A via DIP switches
- Soft-start with no "jump" when powered on
- Pulse input frequency up to 200KHz
- Automatic idle-current reduction
- Protections for over-voltage and over-current
Motor Specification
- Manufacturer Part Number: 23HS45-4204S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8deg
- Holding Torque: 3.0Nm(425oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Inductance: 3.8mH±20%(1KHz)
- Frame Size: 57 x 57mm
- Body Length: 113mm
- Shaft Diameter: Φ10mm
- Shaft Length: 24mm
- D-cut Length: 20mm
- Number of Leads: 4
- Lead Length: 400mm
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Power Specification
- 48V DC 7.3A output
- AC input voltage range: 93~132V/176~264VAC
- 115V/230V AC selected by switch
- High efficiency low cost
- Forced air cooling by built-in DC fan
- Low output ripple and yawp
- Over current, over voltage, short circuit and overheat protections
- 215*115*50mm(L*W*H)
Electrical Specification | |
Has Torque/Thrust Curve? | Yes |
Input Voltage Reference(V) | 24 - 48DC |
No. of Phase | 2 |
Product Type | Open Loop Stepper Kit |
Holding Torque(Ncm) | 300 |
Holding Torque(oz.in) | 425 |
Number of Axes | 4 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Frame Size(mm) | Nema 23 (57 x 57) |
Product Series | TS Series |
Output Shaft Type | D |
Shaft Diameter(mm) | 10 |