1 Axis Closed Loop Stepper CNC Kit 42Ncm(59.48oz.in) Nema 17 Motor & Driver
$48.04
5 + $46.40
10 + $44.86
50 + $43.43
100 + $42.08
- In Stock: 10000
- Model: 1-CL42T-S04-V41
- Gross Weight: 0.89kg
Available Options
Ships within 24 hours for items in stock!
This CNC kit includes:
- 1 x 17HS15-1504D-E1K: Nema 17 Closed Loop Stepper Motor 42Ncm(59.48oz.in) with Encoder 1000PPR(4000CPR)
- 1 x CL42T-V41: Closed Loop Stepper DriverV4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
- 1 x CABLE-PC-1: RS232 Debugging Cable
Motor Specification
- Manufacturer Part Number: 17HS15-1504D-E1K
- Number of phase: 2
- StepAngle: 1.8deg
- Holding Torque: 42Ncm(59.48oz.in)
- Rated Current/Phase: 1.5A
- Phase Resistance: 1.65ohms
- Inductance: 2.5mH ± 20%(1KHz)
- Frame Size: 42 x 42mm
- Body Length: 60mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-Cut Shaft Length: 15mm
- Lead Length: 500mm
Encoder Specification
- Output Circuit Type: Differential type
- Encoder Type: Optical Incremental
- Encoder Resolution: 1000PPR(4000CPR)
- Output Signal Channels: 2 channels
- SupplyVoltage Min: 5V
- SupplyVoltagemAx: 5V
- Output HighVoltage: <4V
- Output LowVoltage: <1V
Driver Specification
- Output Peak Current: 0~3A
- InputVoltage: +24~48VDC(Typical 24VDC)
- Logic Signal Current: 7~16mA (Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- RS232 debugging interface available
- Low noise and vibration, smooth motion
- Protections for over voltage, over current and position following error
Motor and Encoder Connection
PIN |
1 |
2 |
3 |
4 |
Motor |
A+ |
A- |
B+ |
B- |
Electrical Specification | |
Inductance(mH) | 2.5 |
Input Voltage Reference(V) | 24 - 48DC |
No. of Phase | 2 |
Phase Resistance(ohm) | 1.65 |
Product Type | Closed Loop Stepper Kit |
Holding Torque(Ncm) | 42 |
Holding Torque(oz.in) | 59.48 |
Number of Axes | 1 |
Encoder Type | Optical Incremental |
Output Circuit Type | Differential |
Encoder Resolution | 1000PPR |
Output Signal Channels | 2 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Frame Size(mm) | Nema 17 (42 x 42) |
Product Series | TS Series |
Output Shaft Type | D |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |