Menu
Your Cart

Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm

Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
$127.46
5 + $116.38
10 + $110.83
50 + $105.29
100 + $99.75
  • Model: 34HS59-5004D
  • Stock Status: 200
  • SKU: 34HS59-5004D

Available Options

This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.


Electrical Specification

  • Manufacturer Part Number: 34HS59-5004D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 13Nm(1841oz.in)
  • Rated Current/phase: 5A
  • Phase Resistance: 1ohms
  • Inductance: 11mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 151.5mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 37mm
  • Key-Way Length: 25mm
  • Rear Shaft Length: 15mm
  • Rear Shaft Diameter: 12mm
  • Number of Leads: 4
  • Lead Length: 500mm

Connection

A+
A-
B+
B-
Red
Black
Yellow
Blue

Resources

Electrical Specification
Inductance(mH) 11
Phase Resistance(ohm) 1
Rated Current(A) 5
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 1300
Holding Torque(oz.in) 1841
Physical Specification
IP Rating 40
Frame Size(mm) Nema 34 (86 x 86)
Body Length(mm) 151.5
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type KeyWay
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 4
Lead Length(mm) 500
Weight(g) 5450
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
34HS59-5004D_Full_Datasheet.pdf 157.16KB Download
34HS59-5004D.STEP 2.04MB Download
34HS59-5004D_Torque_Curve.pdf 172.11KB Download

Write a review

Note: HTML is not translated!
Bad Good
This Nema 34 dual shaft stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A..
$78.74
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm (1841oz.in)..
$115.69
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$51.96
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$58.11
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$83.29
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.