Menu
Your Cart

Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires

Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
Dual Shaft Nema 23 Unipolar 1.8deg 90Ncm (127.5oz.in) 1A 7.4V 57x56mm 6 Wires
$18.39
5 + $16.82
10 + $16.04
50 + $15.26
100 + $14.47
  • Model: 23HS22-1006D
  • Stock Status: 100
  • SKU: 23HS22-1006D

Available Options

This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127.5oz.in), a rear shaft is made for encoder or equals.


Electrical Specification

  • Manufacturer Part Number: 23HS22-1006D
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.9Nm(127.5oz.in)
  • Rated Current/phase: 1.0A
  • Phase Resistance: 7.4ohms
  • Inductance: 10mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 56mm
  • Shaft Diameter: Φ6.35mm(1/4in)
  • Shaft Length: 20.35mm
  • D-cut Length: 15mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 0.7Kg

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Inductance(mH) 10
Phase Resistance(ohm) 7.4
Rated Current(A) 1
Step Angle(deg.) 1.8
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 90
Holding Torque(oz.in) 127.5
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 56
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 8
Shaft Length(mm) 20.35
No. of Lead 6
Lead Length(mm) 500
Weight(g) 700
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS22-1006D_Full_Datasheet.pdf 146.84KB Download
23HS22-1006D.STEP 2.11MB Download

Write a review

Note: HTML is not translated!
Bad Good
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127...
$17.99
This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$17.99
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm (191..
$25.49
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$30.78
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial..
$32.43
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.