3 Axis CNC Router Kit 13.0Nm(1841oz.in) Nema 34 Stepper Motor & Driver

3 Axis CNC Router Kit 13.0Nm(1841oz.in) Nema 34 Stepper Motor & Driver

$425.81

(100)

3 Axis CNC Router Kit 13.0Nm(1841oz.in) Nema 34 Stepper Motor & Driver

     0 reviews  |  Write a review
SKU: 3-DM860I-34HS59
$425.81

Bulk quantity price break:

Qty 3 10 30 100
Price $402.15 $378.50 $354.84 $331.18
Save 6% 11% 17% 22%
Availability: 100

Qty

askquestion
This CNC kit included:
  • 3 x Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
  • 3 x 13Nm (1841oz.in) of Nema 34 Stepper Motor
  • 3 x 350W 60V 5.9A 115/230V Switching Power Supply

Driver Specification

  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
  • Soft-start with no “jump” when powered on
  • Input voltage 20-80VDC
  • 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-current protection

Motor Specification

  • Manufacturer Part Number: 34HS59-5004S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 13Nm(1841oz.in)
  • Rated Current/phase: 5A
  • Voltage: 5V
  • Phase Resistance: 1ohms
  • Inductance: 11mH ± 20%(1KHz)
  • Frame Size: 86 x 86mm
  • Body Length: 150mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 37mm
  • D-cut Length: 25mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 5kg

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Power Specification

  • 60V DC 5.9A output
  • AC input voltage range: 93~132V/176~264VAC
  • 115V/230V AC selected by switch
  • High efficiency low cost
  • Forced air cooling by built-in DC fan
  • Low output ripple and yawp
  • Over current, over voltage, short circuit and overheat protections
  • 215*115*50mm (L*W*H)

Resources

Stepper Driver Specification
Input Voltage(V) 20 - 80
Output Current(A) 2.4 - 7.2
Power Supply Specification
Output Voltage(V) 60
Power(W) 350
Max. Output Current(A) 5.9
Input Voltage(V) 115/230

Write a review

Note: HTML is not translated!

Do you have any questions about 3 Axis CNC Router Kit 13.0Nm(1841oz.in) Nema 34 Stepper Motor & Driver?