300 CPR Optical Rotary Encoder AB 2-Channel ID 4mm for HKT22 Stepper Motor

Encoder Specification

• Output Circuit Type: Push-Pull (Single-Ended)
• Controlled By: Encoder Interface
• Encoder Resolution: 300 CPR
• Output Signal Channels: 2

Electrical Specification

• Supply Voltage Min: 5 VDC
• Supply Voltage Max: 5 VDC
• Output Current: ≤20 mA
• Output High Voltage: ≥3.4 VDC
• Output Low Voltage: ≤0.3VDC
• Output Frequency Max: 30 KHZ

Physical Specification

• Shaft Diameter: 4 mm
• Operating Temperature Min: -20 ℃
• Operating Temperature Max: 85 ℃
• Cable Length: 0.5 m

Resources

• HKT22 Encoder Manual: HKT22.pdf