Menu
Your Cart

Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in) 4.0A 86 x 86 x 76mm 4 wires

Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in)  4.0A  86 x 86 x 76mm 4 wires
Nema 34 CNC Stepper Motor 3.6N.m (509.90oz.in) 4.0A 86 x 86 x 76mm 4 wires
$35.04
3 + $33.41
10 + $31.78
30 + $30.15
100 + $28.52
  • Model: 34HS30-4004S
  • Stock Status: 100
  • SKU: 34HS30-4004S
This product has a minimum quantity of 50

This bipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x76mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.6N.m (509.90oz.in).

Electrical Specification

  • Manufacturer Part Number: 34HS30-4004S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 3.6N.m(509.90oz.in)
  • Rated Current/phase: 4.00A
  • Phase Resistance: 0.40ohms
  • Inductance: 3.20mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 76mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 35mm
  • D-cut Length: 25mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 2250g

Connection

A+
A-
B+
B-
Red
Green
Yellow
Blue

Resources

Electrical Specification
Inductance(mH) 3.2
Phase Resistance(ohm) 0.4
Rated Current(A) 4.00
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 360
Physical Specification
IP Rating 40
Body Length(mm) 76
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Length(mm) 35
No. of Lead 4
Lead Length(mm) 500
Weight(g) 2250

Write a review

Note: HTML is not translated!
Bad Good
This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end ca..
$19.97
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2A at 2.2V, with holding torque 45..
$8.30
This nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 45Ncm (63.7..
$9.48
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 4 wires, each phase draws current 0.67A, with holding torque 22...
$7.71
This bipolar Nema 23 stepper motor with step angle 1.8deg and size Φ57x28mm. It has 4 wires, each phase draws 0.5A, with holding torque 0.34Nm (48.61o..
$14.73
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.