Menu
Your Cart

Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR

Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
New
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
Nema 34 Closed Loop Stepper Motor 5.8Nm/821.512oz.in Encoder 1000CPR
$61.94
  • Model: 34HS38-6004D-E1000
  • Stock Status: 1
  • SKU: 34HS38-6004D-E1000

Available Options

Notice: this motor can only work with a motor extension cable because of the aviation plug. We'll send you a free motor extension cable with 1.7m length by default. But if you require longer cables, you have to buy from the below recommended ones:

    1.   CM3M-20: RV-4 AWG20 2.7 m(106") Long Motor Extension Cable with GX16 Aviation Plug
  • 2.   CM5M-20: RV-4 AWG20 4.7 m(185") Long Motor Extension Cable with GX16 Aviation Plug

We recommend you getting an encoder extension cable for this motor, here are some for your choice:

    1.   CE2M: 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver
    2.   CE3M: 2.7 m(106") Long Encoder Extension Cable for Closed Loop Stepper Driver
  • 3.   CE5M: 4.7 m(185") Long Encoder Extension Cable for Closed Loop Stepper Driver

Motor Specification

  • Manufacturer Part Number: 34HS38-6004D-E1000
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Frame Size: 86 x 86 mm
  • Holding Torque: 5.8 N.m(821.512 oz.in)
  • Rated Current/phase: 6 A
  • Shaft Diameter: Φ14 mm
  • Shaft Length: 40 mm
  • Key-Way Length: 25 mm
  • Phase Resistance: 0.32 ohm
  • Inductance: 2.8 mH ± 20%(1KHz)
  • Number of Leads: 4
  • Lead Length: 300 mm

Encoder Specification

  • Driving Voltage : 5V
  • Output current : 55mA
  • Resolution : 1000ppr
  • Output Signal : 2 Channels
  • Bore Diameter : Φ8mm
  • Output Frequency : ≤1MHz
  • Running Speed : ≤5000rpm
  • IP Protection : IP20

Connection

A+
A-
B+
B-
White
Green
Blue
Black

Resources

File Size
34HS38-6004D-E1000_Full_Datasheet.pdf 166.48KB Download
34HS38-6004D-E1000.STEP 7.05MB Download
34HS38-6004D-E1000_Torque_Curve.pdf 145.78KB Download

Write a review

Note: HTML is not translated!
Bad Good
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.