Menu
Your Cart

Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor

Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
Nema 23 Bipolar 3Nm (425oz.in) 3.5A 57x57x114mm 4 Wires CNC Stepper Motor
$35.61
5 + $32.52
10 + $30.97
50 + $29.42
100 + $27.87
  • Model: 23HS45-3504S
  • Stock Status: 60000
  • SKU: 23HS45-3504S

Available Options

This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.0Nm (425oz.in).


Electrical Specification

  • Manufacturer Part Number: 23HS45-3504S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 3.0Nm(425oz.in)
  • Rated Current/phase: 3.5A
  • Phase Resistance: 1.2ohms
  • Inductance: 5.0mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 57 x 57mm
  • Body Length: 113mm
  • Shaft Diameter: Φ10mm
  • Shaft Length: 24mm
  • D-cut Length: 20mm
  • Number of Leads: 4
  • Lead Length: 400mm
  • Weight: 1.8kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 5
Phase Resistance(ohm) 1.2
Rated Current(A) 3.5
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 300
Holding Torque(oz.in) 425
Physical Specification
IP Rating 40
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 113
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 10
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 400
Weight(g) 1600
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
23HS45-3504S_Full_Datasheet.pdf 143.42KB Download
23HS45-3504S.STEP 1.93MB Download
23HS45-3504S_Torque_Curve.pdf 159.07KB Download

Write a review

Note: HTML is not translated!
Bad Good
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 4.2A, with holding ..
$34.72
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be..
$47.32
Electrical Specification Manufacturer Part Number: 23HP45-4204S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 3.0 Nm(425oz.in) Rated..
$36.51
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.