Menu
Your Cart

Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires

Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
$50.61
5 + $46.21
10 + $44.01
50 + $41.81
100 + $39.61
  • Model: 34HS26-2006D
  • Stock Status: 100
  • SKU: 34HS26-2006D

Available Options

This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312oz.in). A rear shaft can mount encoder, hand wheel or equals.


Electrical Specification

  • Manufacturer Part Number: 34HS26-2006D
  • Motor Type: Unipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 2.2Nm(312oz.in)
  • Rated Current/phase: 2.0A
  • Phase Resistance: 2.2ohms
  • Inductance: 7.0mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 86 x 86mm
  • Body Length: 66mm
  • Shaft Diameter: Φ14mm
  • Front Shaft Length: 37mm
  • D-cut Length: 25mm
  • Rear Shaft Length: 34mm
  • Number of Leads: 6
  • Lead Length: 300mm
  • Weight: 1.7kg

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Inductance(mH) 7
Phase Resistance(ohm) 2.2
Rated Current(A) 2
Step Angle(deg.) 1.8
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 220
Holding Torque(oz.in) 312
Physical Specification
IP Rating 40
Frame Size(mm) Nema 34 (86 x 86)
Body Length(mm) 66
Single Shaft/Dual Shaft Dual Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 6
Lead Length(mm) 300
Weight(g) 1700
  • Motor Shaft
  • Cable
  • Connector
  • Encoder
  • Brake
  • Gearbox


File Size
34HS26-2006D_Full_Datasheet.pdf 146.87KB Download
34HS26-2006D.STEP 1.8MB Download

Write a review

Note: HTML is not translated!
Bad Good
This Nema 34 dual shaft stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A..
$78.74
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$51.96
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$58.11
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be ..
$83.29
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.