- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 17 Unipolar 1.8deg 26Ncm (37oz.in) 0.4A 12V 42x42x39mm 6 Wires
Nema 17 Unipolar 1.8deg 26Ncm (37oz.in) 0.4A 12V 42x42x39mm 6 Wires
Nema 17 Unipolar 1.8deg 26Ncm (37oz.in) 0.4A 12V 42x42x39mm 6 Wires
5
1
SKU: 17HS15-0406S
$9.95
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $9.08 | $8.65 | $8.22 | $7.79 |
| Save | 9% | 13% | 17% | 22% |
Availability: 447
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 0.4A at 12V, with holding torque 26Ncm (37oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS15-0406S
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 26Ncm(37oz.in)
- Rated Current/phase: 0.4A
- Voltage: 12V
- Phase Resistance: 30.0ohms
- Inductance: 30mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 39mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 290g
Connection
A+ |
O+ |
A- |
B+ |
O- |
B- |
BLK |
YEL |
GRN |
RED |
WHT |
BLU |
Resources
- Full Datasheet: 17HS15-0406S.pdf
- Torque Curve: 17HS15-0406S Torque Curve.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Holding Torque(Ncm) | 26 |
| Holding Torque(oz.in) | 37 |
| Inductance(mH) | 30 |
| Phase Resistance(ohm) | 30 |
| Rated Current(A) | 0.4 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 39 |
| Frame Size(mm) | 42 x 42 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Lead | 6 |
| Lead Length(mm) | 500 |
| Weight(g) | 280 |
